dmesg - Test Fx 8150
Linux version 4.10.10-200.fc25.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Thu Apr 13 01:11:51 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd71afff] usable
BIOS-e820: [mem 0x00000000bd71b000-0x00000000bd76dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd76e000-0x00000000bd776fff] ACPI data
BIOS-e820: [mem 0x00000000bd777000-0x00000000bd777fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd778000-0x00000000bdad6fff] reserved
BIOS-e820: [mem 0x00000000bdad7000-0x00000000bdae7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdae8000-0x00000000bdafcfff] reserved
BIOS-e820: [mem 0x00000000bdafd000-0x00000000bdafefff] ACPI NVS
BIOS-e820: [mem 0x00000000bdaff000-0x00000000bdb07fff] reserved
BIOS-e820: [mem 0x00000000bdb08000-0x00000000bdb0dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bdb0e000-0x00000000bdb6efff] reserved
BIOS-e820: [mem 0x00000000bdb6f000-0x00000000bdd71fff] ACPI NVS
BIOS-e820: [mem 0x00000000bdd72000-0x00000000bdefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Crosshair V Formula, BIOS 1703 10/17/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BDF00000 mask FFFFFFF00000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbdf00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbdf00 max_arch_pfn = 0x400000000
Base memory trampoline at [ffffa03680097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0xa337d000, 0xa337dfff] PGTABLE
BRK [0xa337e000, 0xa337efff] PGTABLE
BRK [0xa337f000, 0xa337ffff] PGTABLE
BRK [0xa3380000, 0xa3380fff] PGTABLE
BRK [0xa3381000, 0xa3381fff] PGTABLE
BRK [0xa3382000, 0xa3382fff] PGTABLE
BRK [0xa3383000, 0xa3383fff] PGTABLE
BRK [0xa3384000, 0xa3384fff] PGTABLE
BRK [0xa3385000, 0xa3385fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x359fc000-0x36cf5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD76E068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD775340 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
ACPI: DSDT 0x00000000BD76E150 0071EC (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BDB08F80 000040
ACPI: APIC 0x00000000BD775438 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD7754D8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD775518 000038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 0x00000000BD7755A8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23efd3000-0x23effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bd71afff]
node 0: [mem 0x00000000bdd72000-0x00000000bdefffff]
node 0: [mem 0x0000000100001000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2082884
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12067 pages used for memmap
DMA32 zone: 772265 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd71b000-0xbd76dfff]
PM: Registered nosave memory: [mem 0xbd76e000-0xbd776fff]
PM: Registered nosave memory: [mem 0xbd777000-0xbd777fff]
PM: Registered nosave memory: [mem 0xbd778000-0xbdad6fff]
PM: Registered nosave memory: [mem 0xbdad7000-0xbdae7fff]
PM: Registered nosave memory: [mem 0xbdae8000-0xbdafcfff]
PM: Registered nosave memory: [mem 0xbdafd000-0xbdafefff]
PM: Registered nosave memory: [mem 0xbdaff000-0xbdb07fff]
PM: Registered nosave memory: [mem 0xbdb08000-0xbdb0dfff]
PM: Registered nosave memory: [mem 0xbdb0e000-0xbdb6efff]
PM: Registered nosave memory: [mem 0xbdb6f000-0xbdd71fff]
PM: Registered nosave memory: [mem 0xbdf00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbdf00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffffa038bec00000 s108952 r8192 d30312 u262144
pcpu-alloc: s108952 r8192 d30312 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2050316
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 8093596K/8331536K available (8553K kernel code, 1622K rwdata, 3536K rodata, 2136K init, 1816K bss, 237940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:1032 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3612.055 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7224.11 BogoMIPS (lpj=3612055)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31542 entries in 124 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (57785.75 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbd71b000-0xbd76dfff] (339968 bytes)
PM: Registering ACPI NVS region [mem 0xbd777000-0xbd777fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbdad7000-0xbdae7fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xbdafd000-0xbdafefff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xbdb08000-0xbdb0dfff] (24576 bytes)
PM: Registering ACPI NVS region [mem 0xbdb6f000-0xbdd71fff] (2109440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 7:03:16, date: 04/22/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x24: [mem 0xfe500000-0xfe5001ff]
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:02:00.0: [8086:150c] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xfe420000-0xfe423fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:06:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:06:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:06:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:06:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:0c.0: PCI bridge to [bus 06]
pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0c.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:0c.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd71b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:0c.0: PCI bridge to [bus 06]
pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0c.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:0c.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:07: resource 10 [mem 0xc0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19432K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb971b000-0xbd71b000] (64MB) mapped at [ffffa0373971b000-ffffa0373d71afff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink subsys (disabled)
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b380 irq 19
ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500100 irq 28
ata8: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500180 irq 28
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfe607000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfe604000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfe608000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfe605000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.10.10-200.fc25.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:03:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb9: SerialNumber: 0000:03:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb10: SerialNumber: 0000:04:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb11: SerialNumber: 0000:04:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb12: SerialNumber: 0000:05:00.0
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 13
usb usb13: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 4.10.10-200.fc25.x86_64 xhci-hcd
usb usb13: SerialNumber: 0000:05:00.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: microcode updated early to new patch_level=0x0600063d
microcode: CPU0: patch_level=0x0600063d
microcode: CPU1: patch_level=0x0600063d
microcode: CPU2: patch_level=0x0600063d
microcode: CPU3: patch_level=0x0600063d
microcode: CPU4: patch_level=0x0600063d
microcode: CPU5: patch_level=0x0600063d
microcode: CPU6: patch_level=0x0600063d
microcode: CPU7: patch_level=0x0600063d
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 919fa274849d269e0f25c45cafbe597b6d7da927'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 13:892:66
rtc_cmos 00:03: setting system clock to 2017-04-22 07:03:18 UTC (1492844598)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.13, max UDMA/100
ata4.00: configured for UDMA/100
ata6.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD5002AALX-00J37A0, 15.01H15, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata2.00: ATAPI: PLEXTOR BD-R PX-LB950SA, 1.06, max UDMA/100
ata5.00: configured for UDMA/133
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM PLEXTOR BD-R PX-LB950SA 1.06 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.13 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 4:0:0:0: Direct-Access ATA WDC WD5002AALX-0 1H15 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5
usb 5-4: new full-speed USB device number 2 using ohci-pci
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdc] Attached SCSI disk
usb 12-1: new low-speed USB device number 2 using xhci_hcd
usb 5-4: New USB device found, idVendor=046d, idProduct=c048
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-4: Product: G9 Laser Mouse
usb 5-4: Manufacturer: Logitech
usb 5-4: SerialNumber: C691565D740029
input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.0/0003:046D:C048.0001/input/input2
hid-generic 0003:046D:C048.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G9 Laser Mouse] on usb-0000:00:13.0-4/input0
input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.1/0003:046D:C048.0002/input/input3
hid-generic 0003:046D:C048.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G9 Laser Mouse] on usb-0000:00:13.0-4/input1
usb 12-1: New USB device found, idVendor=046d, idProduct=c248
usb 12-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 12-1: Product: Gaming Keyboard G105
usb 12-1: Manufacturer: Logitech
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12/12-1/12-1:1.0/0003:046D:C248.0003/input/input4
hid-generic 0003:046D:C248.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G105] on usb-0000:05:00.0-1/input0
ata8: SATA link down (SStatus 0 SControl 300)
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12/12-1/12-1:1.1/0003:046D:C248.0004/input/input5
Freeing unused kernel memory: 2136K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1672K
Freeing unused kernel memory: 560K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd-cryptse: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
hid-generic 0003:046D:C248.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Logitech Gaming Keyboard G105] on usb-0000:05:00.0-1/input1
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
tsc: Refined TSC clocksource calibration: 3612.040 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3410c1595cd, max_idle_ns: 440795265528 ns
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock
e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:0b:c6:7e
e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:02:00.0 enp2s0: renamed from eth0
random: crng init done
clocksource: Switched to clocksource tsc
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[263]: Received SIGTERM from PID 1 (systemd).
systemd: 16 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 106778 rules.
SELinux: 32768 avtab hash slots, 106778 rules.
SELinux: 8 users, 14 roles, 5071 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106778 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 198.265ms.
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: Relabelled /dev and /run in 18.768ms.
EXT4-fs (dm-1): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
acpi_cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
systemd-journald[7059]: Received request to flush runtime journal from PID 1
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc2fc80ce5b00). heartbeat=60 sec (nowayout=0)
[drm] Initialized
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
asus_wmi: Number of fans: 1
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_intel 0000:06:00.1: Disabling MSI
snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0c.0/0000:06:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0c.0/0000:06:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0c.0/0000:06:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0c.0/0000:06:00.1/sound/card1/input18
Adding 8249340k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8249340k FS
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 242
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.39 Tue Jan 31 20:47:00 PST 2017
(using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.39 Tue Jan 31 19:41:48 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000600] Loading driver
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=2000 audit(1492844597.841:1): initialized
audit: type=1130 audit(1492844599.145:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.147:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.198:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.221:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.272:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.297:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.301:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.362:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1492844599.378:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nvidia-modeset: Allocated GPU:0 (GPU-6073f229-fb08-beb2-8936-fc0f469cc995) @ PCI:0000:06:00.0
fuse init (API version 7.26)
show_signal_msg: 67 callbacks suppressed
MaiaLinux[9149]: segfault at 48 ip 00005599ffa7b660 sp 00007ffc7d1e4da0 error 4 in MaiaLinux[5599ff8ac000+254000]